Home Page Finoric LLC
Call Toll-Free: 1-855-FINORIC
Houston Pleasanton & Midland, Texas and Chicago, Illinois, USA
Email: info@finoric.com

SDS GHS, MSDS Sheet, Material Safety Data Sheet of Clay Stabilizer

MATERIAL SAFETY DATA SHEET

1. PRODUCT AND SUPPLIER IDENTIFICATION

COMMERCIAL NAME: Clay Sté 70
Supplier: Finoric LLC
Address: 8115 Loop 540, Beasley, TX – 77417
Tel: 773-829-5811

In case of emergency contact:
InfoTrac
US: 1-800-535-5053
International: 352-323-3500

2. HAZARDS IDENTIFICATION

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910

GHS Label Elements
NONE

Signal Word: None

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes eye irritation.
May be harmful if inhaled.
May cause respiratory irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

HMIS Perceived
Health hazard: 1
Flammability: 1
Physical hazards: 0
NFPA Perceived
Health hazard: 1
Fire: 1
Reactivity Hazard: 0

3. COMPOSITION / INFORMATION ON INGREDIENTS

CHEMICAL IDENTIFICATION: Blend
CAS Number: Mixture
EINECS: N/A
FEMA: N/A
None of the components of this product are hazardous.
Composition/specific chemical identities are withheld as a trade secret under the provisions of OSHA hazard communication standard 29 CFR 1910.1200

4. FIRST-AID MEASURES

Always seek medical advice after the first aid treatment.

EYE CONTACT: - Rinse immediately with plenty of water for 10 minutes at least. Contact a physician if symptoms persist.
SKIN CONTACT: Wash thoroughly with soap and water; flush with plenty of water. Take off spoilt clothes. Contact physician if symptoms persist.
INGESTION: Wash the mouth with water; seek medical advice immediately.
INHALATION: Remove from exposure site to fresh air and keep at rest. Obtain medical advice.

5. FIRE-FIGHTING MEASURES

EXTINGUISHING MEDIA RECOMMENDED: CO2, foam, dry chemicals.
NOT RECOMMENDED: Do not use direct water jet on burning material.
FLASH POINT: ND
LOWER EXPLOSIVE LIMIT: ND
UPPER EXPLOSIVE LIMIT: ND
AUTOIGNITION TEMPERATURE: ND
SPECIAL FIRE FIGHTING PROCEDURES: Containers can build up pressure if exposed to heat (fire). As in any fire, wear a self-contained breathing apparatus pressure demand (MSHA/NIOSH approved or equivalent) and full protective gear. Apply alcohol-type foam or all purpose foam manufacturers recommended techniques for large fires. Use carbon dioxide or dry chemical for small fires. Use water spray to keep containers cool.

6. ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS: Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses). Prevent any contact with hot surfaces. Do not approach facing the wind.
ENVIRONMENT PRECAUTIONS: Keep away from drains, surface and groundwater and soil.
METHODS FOR CLEANING UP: Contain spilled material. Cover with an inert, noncombustible, inorganic absorbent material, or sweep up, and remove to an approved disposal container. Avoid open flames or other sources of ignition.

7. HANDLING AND STORAGE

PRECAUTIONS IN HANDLING: Apply according to good manufacturing and industrial hygiene practices with proper ventilation. Do not drink, eat or smoke while handling. Respect good personal hygiene.
STORAGE CONDITIONS: Store in cool, dry and ventilated area away from heat sources and protected from light in tightly closed original container. Keep air contact to a minimum.
FIRE PROTECTION: Keep away from ignition sources and naked flame.

8. EXPOSURE CONTROL

RESPIRATORY PROTECTION: -- Avoid to breath directly on the product. Apply local ventilations when appropriate. Use a NOISH/MSHA approved air purifying respirator with an organic/amine vapor cartridge when airborne concentration is expected to exceed exposure limits.
VENTILATION: Ensure good ventilation of the work station.
HAND PROTECTION: Avoid skin contact. Use chemical resistant gloves as needed.
EYE PROTECTION: Use safety glasses and/or splash shield.
WORK / HYGIENIC PRACTICES: Wash hands with soap and water after handling.

9. PHYSICAL AND CHEMICAL PROPERTIES

ODOR: Characteristic
COLOR: Clear colorless to light yellow
PHYSICAL STATE: Liquid
FLASHPOINT (C): ND
BOILING POINT (C):- > 100C
MELTING POINT (C): < 50F
pH: 5 – 9
SOLUBILITY IN WATER: Soluble
SPECIFIC GRAVITY: 1.05 – 1.10

10. STABILITY AND REACTIVITY

REACTIVITY: It presents no significant reactivity hazards, by itself or in contact with water. Avoid contact with strong acids, alkali or oxidizing agents.
DECOMPOSITION: Carbon monoxide and unidentified organic compounds may be formed during combustion.
INCOMPATIBILITY: Avoid contact with strong acids and strong oxidizers.
HAZARDOUS POLYMERIZATION: Will not occur.
DECOMPOSITION PRODUCTS: Oxides of Carbon.
STABILITY: Stable under recommended storage conditions.

11. TOXICOLOGICAL INFORMATION

ORAL: Product is classified as moderately irritating to stomach and digestive tract
DERMAL: Product is classified as moderately irritating to skin
INHALATION: Product is classified as moderately irritating to nasal passage and eyes
LD 50 ORAL/RAT (mg/Kg): ND
LD 50 DERMAL/RABBIT (mg/Kg): ND

12. ECOLOGICAL INFORMATION

BIODEGRADABILITY: Yes
ECOTOXICITY: ND
CHEMICAL FATE INFORMATION: ND

13. DISPOSAL CONSIDERATIONS

In accordance with local environmental laws. Avoid disposing into drainage systems and into the environment.
RCRA STATUS: None

14. TRANSPORT REGULATIONS

ROAD (DoT/ADR/RID) Not Regulated
AIR (IATA) Not Regulated
SEA Not Regulated

15. REGULATORY INFORMATION

SECTION 311/312: This product has been reviewed according to the EPA ‘Hazard Categories’ promulgated under Sections 311 and 312 of the Superfund Amendments and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories: NONE
SARA SECTION 313: This product does not contain substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372; COMPONENT CAS# % BY WEIGHT: None
TSCA STATUS: All components of this product are listed on the Toxic Substance Control Act Inventory or are excluded from the listing requirements.

16. OTHER INFORMATION

*******************************
Our company provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
********************************

Finoric LLC
Houston Pleasanton & Midland, Texas, and Chicago, Illinois, USA.

Tel: 773-829-5811
Email: info@finoric.com

Most products offered from our Pleasanton, Oklahoma, Midland & Houston, TX area warehouse

We are looking for Technical Sales Representatives in Williston North Dakota, Mansfield Pennsylvania and Zanesville Ohio.